Grunler Technical Resources, provide human resource assistance for Textile Mills and Offset Printing press located in Europe, Balkan, Scandinavia, South America & African regions offering after sales services for all textile machinery. All our Technical resource have experience to commission, overhaul the production systems. We have a continuous requirement of technically skilled engineers for our customers. At Grunlertechnical resource we offer competitive salary with Annual incentive, Paid vacation, Retirement and Medical benefit as per European union policy.
Candidates will be stationed onsite mill floor.
Candidates have to erection of winding & open ended spinning machines.
Commissioning of winding & open ended spinning machines.
Servicing of winding & open ended spinning machines.
Trouble shooting for winding & open ended spinning machines and technology.
Candidate should also have knowledge on the following machines from Truetzschler&SchlafhorstSaurer
Truetzschler carding machines – DK740, DK760, DK803, DK903, TC03, TC07, TC11
Truetzschlerblowroom lines
Truetzschler TD03, TD08, draw frames
SchlafhorstSaurer BD330, BD350, SE 7, SE8, SE 9, ACO 240, ACO 312 Open End spinning Machine
Experience – 2 to 7 Years
Work Location – European Union & Russia
No.of Position – 18
Travel – 10%
Preference – Russian, EU Citizen (or) Candidates with EU-PR.
Provide technological support to customer during commissioning of individual machines and complete systems.
Should have complete knowledge on the Following Rieter Machines.
Rieterblowroom lines
Rieter C50,C51,C60,C70 carding machines
Rieter RSB851, RSB951, RSB D30, RSB D35, RSB D40, RSB D45 drawing frames
Rieter Ring frames
Rieter BT 903, BT 904, Rieter M1, R1-4644
analyze technological problems and seeking solutions to the customer in the mills
briefing and instruction of the mill personnel to carry out problem solving
Technological optimization of Rieter machines in the process line
Annual contract warranty inspections
Technological sales support
assistance in experiments on a spinning center
Experience – 5 to 10 Years
Work Location – European Union & Russia
No.of Position – 9
Travel – 10%
Preference – Russian, EU Citizen (or) Candidates with EU-PR.
Assist Senior Service Engineer in Installation & maintenance of textile machineries
Able to manage first level support
Should have a flair of Customer service
Candidates should have basic knowledge of Electrical, Electronics & Mechanical instruments
Candidates should be ready to perform 60% of Physical activity on Machinery.
Candidate with knowledge on any of the following machinery will be given preference.
Murata Vortex Airjet spinning machines
Mayer &Cie circular knitting machines
Terrot
Monarch
Lonati socks knitting machinery
Bruckner stenter frames
Monfortssaniforizing machine
Thies& Then dyeing machines
Zimmer rotary printing machinery
Reggianiflat bed printing machinery
Experience – 0 to 2 Years
Work Location – European Union & Russia
No.of Position – 18
Travel – 80%
Preference – EU Citizen, Russian, Bulgarian
Minimum of 10 Years experience as Senior Service Technician
Should have in depth technical knowledge on any of the following product range
Elitex OE RCE, BD 200 RN, BD 200 SN, BD D30, BD 200D
Circular Loom & Needle (Webbing) Looms.
Zinser Ring Frames
Sulzer Looms like Tw11, PU, P7100, P7200, P7300 Projectile looms
Picanol Gamma, Gammax, Optimax looms
Dornier rapier &airjet Looms
Somet looms
Vamatex looms
Manage a team of 30 Service Engineers
Plan and manage daily maintenance activities and prepare Monthly Service Reports.
Execution of break down in time with running equipment.
Check for all Contracts. In-depth knowledge to conduct workshop to Service Technicians.
Manage overall maintenances and Service Technicians Career progression and perform annual appraisal.
Experience – 10 to 15 Years
Work Location – Monterrey – Mexico, Sao Paulo – Brazil, Bogota – Colombia, Buenos Aires – Argentina
No.of Position – 8 (2 Candidates per location)
Salary – 4000 US$ to 7500 US$
Travel – 40% across South America.
Preference – Read, Speak and Write in Spanish, Portuguese, French, German.
Sample preparation for different test parameters
Testing of samples as per international test methods
Evaluation of samples with reference to the different protocols
Check the quality of the results compiled
Co ordinate with different sections for any clarifications
Key Deliverables :
Effective implementation of buyer test protocols of testing.
Responsible for issuing reports with highest precision.
Consistency in both the qualitative and quantitative analysis.
Training Technical Asst. for specimen preparation and chemical analysis as per test specifications.
Error free test results reporting and implementation and maintaining buyer protocols.
Technical Skills Desired:
Technical knowledge about the Textile products testing.
In-depth knowledge on textile manufacture fiber to garment.
Exposure to international testing methods.
Skills on handling testing equipment’s like Uster Tester, Zweigle Testing machines
Experience – 2 to 5 Years
Work Location – Tunisia, Egypt, Morocco
No.of Position – 4
Travel – 10%
Preference – Local Candidates.
Accountabilities & Responsibilities – Production
Producing quality products
Reducing the cost of conversion through effective utilization of resources.
To reduce scrap and down grade.
Mill floor management for effectiveness
Maintenance
Ensure effective maintenance of Twisters, Loom, and Dipping machines
Reducing maintenance down time
Reducing maintenance cost
Customer Satisfaction
Achieving the exact requirement of the customers in term of QC.
Satisfying the customer needs with consistent quality products
TQM & Quality Systems
Promote TQM principles and habits in the workplace.
To make all members capable and to participate in improvements.
Assuring Safety, Health and environment in the work place.
Focus on global best practices to improve the human capability and safe working in mill floor.
Deliveries
Production planning to meet the delivery schedules.
Project
Ensure execution of project as per activity plan and cost allocated.
Experience – 20 to 25 Years
Work Location – Nigeria
No.of Position – 2
Salary – 3000 US$ to 5000 US$
Travel – 15%
We have multiple openings across European Union, Scandinavia, Russia, Peru, Mexico, USA, Canada, Australia, South Africa, Kenya, Nigeria, Egypt, Japan, South Korea, China, Taiwan, Vietnam, Bangladesh, India.
Candidates with 0-10 Years’ experience in providing Offset Printing machine technical service in any of the following Offset Printing Machinery range can send us your Resume We will evaluate and contact the shortlisted candidates with Location Preference.
Pre-press
Agfa
Creo
Dupont
Sheetfed
Adast
Akiyama
Heidelberg
Komori
KBA Rapida
Man roland
Mitsubishi
Post-Press
Bobst
Bremer
Duplo
Horizon
Stahl
No.of Position – Multiple positions across geography
Travel – 10 – 40%
Preference – Local Candidates.
Salary – 500 US$ to 4500 US $
Send your updated resume to careers@grunler.com
see below for our disclaimer and Terms and Conditions of Sale.
Disclaimer of Use
The data provided in this website is intended for general informative purposes only and does not constitute advise (or) recommendations which are not binding in any form. Although every effort has been made to ensure that the information provided is both accurate and up to date, we accept no responsibility for any errors.
We hereby distance ourselves expressly from any linked websites, for which we accept no responsibility for whatsoever. The contents of this website should only be distributed or duplicated in any way with the express prior permission of Grunler Holdings.